How to use nylon hose

Hose and hose assemblies should only be used to convey the designed materials; otherwise, their service life will be reduced or they may fail.

Hose and hose assemblies should only be used within their designed operating pressure and should not be used at pressures exceeding their design working pressure.

The temperature of the medium transmitted by the hose and hose assemblies should not exceed -40℃ to +120℃; otherwise, their lifespan will be shortened.

Hose and hose assemblies should not be used with a bending radius smaller than the minimum bending radius of the hose. Avoid bending or kinking near the hose fittings, as this will hinder hydraulic transmission and material conveying or damage the hose assembly.

Hose and hose assemblies must not be used in a twisted state.

Hose and hose assemblies should be handled with care during transportation. Do not drag them on sharp or rough surfaces, and do not bend or flatten them.

Hose and hose assemblies should be kept clean, with internal cleaning performed to prevent foreign objects from entering and damaging the equipment.